Description
Dreadbox Komorebi is a fully analog chorus/flanger effects pedal that uses bucket brigade delay (BBD) chips to achieve its authentically vintage sound.
The controls let you precisely dial in your chorus and flanger sounds, with a STATIC knob to set initial delay time between 2ms and 35ms, a FEEDBACK knob to set the amount of delay feedback and an AMOUNT knob to set LFO depth.
Komorebi has three LFO/modulation waveforms – sawtooth, reverse sawtooth (ramp) and triangle – as well as an LFO RATE knob to dial in LFO speeds from 15 seconds to 110Hz.
There are also three 1/8″ eurorack-friendly patch points, with two CV inputs to let you affect the STATIC and RATE values via control voltages and an output share Korembi’s LFO wave with other CV-capable gear.
Please note that the old version of the pedal (15VDC) is not available any more, but the new version is drastically improved. Listed below are the improvements made to the current version of Komorebi.
- A dedicated adapter is no longer needed. You can use any power supply that is made for effect pedals ( 9vDc 2,1mm centre negative)
- Kept the same headroom by adding high quality voltage converters by Texas Instruments
- Floor noise and signal to noise ratio is greatly reduced
- LFO Saw pop noise is minimized
- Removed the DIP switch on the back, as it was confusing
- Allowed higher delay times (it was 2ms to 30ms now it is 2ms to 35-40ms)
- Added a soft switch for easier on/off action
- On the downsides, the true by pass was removed, but a CMOS technology is handling that. CMOS switches are completely colorless and transparent buffers, but they need power to work.
Reviews
There are no reviews yet.